.

3DK now has a Twitter account.

2011-04-02T12:40:00.000-07:00

Hello to all my 3DK blogg readers.

I have now set up a Twitter account so I can get to know modellers who are interested in what I am doing. When you are shut up in the workshop all day it is nice to talk. You can view my Twitter account at: http://twitter.com/#!/threedk/status/54264582549680128

Also, you can view my new low relief kits at http://www.3dk.ca/

Thank you, Calum Faeorin-Cruich 3DK

Completed Resin Weighbridge Kit

2011-03-30T10:19:00.000-07:00

Hello there to all our 3DK blog readers.

As you read in my blog of March 16th, I had been working on a Highland Castings commission for a company in the United Kingdom (Invertrain.com). I was commissioned to produce a commercial resin kit of Alnwick weighbridge office. Well I have now finished the work and have posted the completed demo kit images here for your enjoyment. I have lit the inside of the kit so you get a nice view of the internal detailing that comes with the building. It has internal walls with a host of detailing cast on to them.

The next project I have been commissioned to do is a set of stone North Eastern Railway coal drops for a customer in Europe.

I am also working hard to complete a spring clean of my web site at www.3dk.ca and trying to up-load all my new kits before the snow melts.

Thanks and happy modeling and remember, if you want any information on our services and products then drop me a line at h3dk@live.ca or visit my website at www.3dk.ca.

2011-03-16T11:30:00.000-07:00

Hello there to all our 3DK blog readers.

We are nearly into spring and the workshop is due for a good spring clean. I find that the shop accumulates a large amount of off cuts and bits and bobs from designs and kits that I have been working on and as much as I would love to keep it all just in case that small piece of styrene might be needed, it has to go to make room for more off cuts from all the new designs we have on the go.
We are nearing the completion of one design for a UK company and they commissioned us to produce an O Gauge 7mm to 1 foot resin kit which is based on a south of England stone weighbridge. I make the walls out of soft casting plaster which can be nicely carved. The stone work at the corners must fit exactly with all the other walls and over the years I have developed a unique system to ensure that the stonework is a perfect fit.

Image 1 shows the base the four walls will sit on under construction. The base is a mixture of styrene and carved casting plaster.

Image 2 & 3 show the two end gable walls carved and ready for the silicone rubber to be poured forming the mold I will be casting the silicone resin from.

Images 4 and 5 show the cured silicone rubber before removing from images 2 and 3. This is always a tense time as the rubber mold could stick to the pattern is you have not applied enough mold release fluid.

Image 6 show all the various wall sections and window cast in silicone resin ready for assembly.

Images 7 & 8 show the assembled walls glued in place on top of the stone resin base that was cast separatly.

Image 9 shows the detailed chimney which is cast in three parts to simplify assembly.

Image 10 is the image taken at Beamish open air museum of the stone weighbridge that we were commissioned to produce. This was all we had to work from as we do not normally get detailed drawings so we have to produce our own which we submit to our customer to look over and adjust where appropriate. I still have to make the patterns and molds for the roof, door, fireplace, internal walls, gutters and drainpipes and I will post these when I have completed them so you can see the finished kit. Thanks and happy modeling and remember, if you want any information on our services and products then drop me a line at h3dk@live.ca or visit my website at www.3dk.ca.

Calum Faeorin-Cruich
905-538-6755

New 3DK Hydrocal Kits

2011-03-13T19:05:00.000-07:00

Hello to all my blog readers,

I have just released my new HO Scale hydrocal building kit. This is a bit of a change for me as my normal line of building kits are made from cardstock. I design and produce hydrocal kits for other companies in the United States, Great Britain and Canada but this is the first time I have produced any under the banner of 3DK. Hydrocal is a product of U.S. Gypsum. It has great strength, much more than plaster and reproduces detail to a very fine degree.

The kit includes hydrocal walls; roof and platform with injection molded Tichy windows, cast resin doors and resin accessories. The kit also includes a detailed printed interior. Also included with the kit are packing cases, sack piles and covered loads. I am uploading the kit to my web site at www.3dk.ca over the next week so please feel free to go online and have a look.

There will be a few more coming out in the near future so keep an eye on my blog or my web site and as always, if you have any suggestions then please drop me a line and happy modelling

Website online, new model railway bus and garage depots

2011-03-08T19:35:00.000-08:00

Hello there to all our new and old customers.

Some of you may have noticed that our web site (www.3dk.ca) was offline for about a month. I decided to move my site to a better server and encountered a pile of problems that took me a while to sort out. But now it is up and running again and I am starting to up-load our new range of model railway building flats in S Scale and O Scale which will please the larger scale enthusiasts. I am at the moment designing a new range of bus and garage depots in O Scale and S Scale which should be ready for sale in April so keep an eye or my web site. Happy modeling.

Calum 3DK

New building flat

2010-09-03T12:14:00.000-07:00

Hello to all our 3DK customers,

To start the month of September we are releasing a new HO Scale row of shop building flats. These compliment well the exisiting range of shop and industrial fronts we already produce. We are working hard to produce them in N Scale, S Scale and O scale before the end of the month and we will let you know when these are available.

Regards,

Calum 3DK

New 3DK Product releases.

2010-07-22T12:18:00.001-07:00

A big hello to all our 3DK bloggers.

This week’s news is that we are adding more building flats to our range. The new building flats are HO Scale with N, S & O Scale to come over the next few weeks. The new designs are based on engineering buildings that could be found all over North America.

They are your typical downtown industrial grubby well used factory units. They can be assembled as one long complete unit or can be assembled as three separate units. They are wonderfully detailed and would look great as a backdrop to an industrial scene. The building flats should be available on our web site (www.3dk.ca) from the 26^th July onwards so keep an eye out for their release.

Calum 3DK

Web site additions.

2010-07-12T18:26:00.000-07:00

Hello to all our customers and just a few lines about our new web site.

We have just uploaded it and I am quite proud of it as it has been all my own work, so if you spot any spelling mistakes then please let me know as I am to blame. There are bound to be a few.

The new site has a new competition page which is pretty cool. Just re-assemble the picture and let us know what it is and you will be entered into our price draw where you could win a 3DK building kit. The site also now has a site map which enables you to find your way around the site very fast once you know what you are after.

We have added a PDF download of our 2010 colour catalogue so you can print it off and keep it handy for when you need it. We have added a range of YouTube videos showing the building kits in full techno colour which are fun to watch.

On the main page to the bottom right there is an “Old Time Radio” link to a wonderful recording of the Green Valle Line in 1934. This follows the story of a small country railroad and is great to listen to. Also we have added a link to “Building Your Own Layout” which is a great site for those modellers just starting in the hobby.

Well that’s all for now but keep an eye on my blog page for updates and above all, happy modelling!

Calum 3DK

New 3DK Product releases.

2010-07-02T18:17:00.001-07:00

We have just recently finished a whole series of building flats in N, HO, S & O Scales, which are available from our web site www.3dk.ca.

They are so simple to apply, simply cut out and stick down. Eack pack can be assembled in a variety of ways.

3DK'S now broadcasting to the world

2010-07-02T17:46:00.001-07:00

Now that we have got our new website nearly finished we can start letting our customers know exactly what we are up to on a weekly basis. You can keep track of new products and submitfeedback on whether we are getting it right or not.